Save Money on the DIY iPhone Screen Repair
Unlike its known competitors, the iPhone 4 does not have a toughened Gorilla glass for its screen. The screen is thus prone to breaking and causes many problems for many owners. Getting a new screen is quite costly but you can visit out iphone 3gs repair cleveland facility anytime to get it professionally done. Unfortunately, Apple fails to give a warranty for the screens and their price can be much escalated. If you plan to repair an iPhone 4 front glass, then be prepared to cough up to $200 just to have it repaired. This money can as well be used to purchase a new phone. The question remains what to do with an iPhone 4 with a broken screen. Repairing or buying a new one becomes a favored option. One can also easily take them to the repair shops. But in this article, we shall focus on the DIY of iPhone screen repair.
Where to get the iPhone 4 Screen Kits
First you need an excellent repair kit. This can be sourced from the numerous stores. Look for them at the DIY sections in electronic shops or simply find them on the net. Make sure that before you do any buying, the products are top quality. This is due to their high cost. You should not expect any refunds in case things go wrong so be selective.
Some of the 3G screens, though they resemble the iPhone 4, differ from them. They may have the same sizes but have different electric mechanisms and connections. The kits for replacement should be below $65. Agree to pay for those that are around $12-$15. There are chances that you may get dubious kits. Once you have got the kit, ensure that all the data on your phone get properly backed up.
The needed Tools
· Alcohol
· Phillips screw drivers(#00)
· A sharp razor
· Tweezers
· Suction cup
The process should then begin. The iPhone should be put on a clean surface upside down. Make sure the back is facing you. The 2 screws that are next to the USB connector will have to be unscrewed first. The screen can them be removed by scrapping them out. Use a thinner blade for this. The suction cup is to be used to lift this screen out. There are two flaps that fix the screen to the phone. Look for these and slowly lift them and have it separated. This should expose a further six similar screws.
Unfixing the iPhone LCD from the glass
This is the step after you have unscrewed. Once the LCD is de-attached from the damaged screen, all those broken pieces can now be removed. This will have to be carefully done using the alcohol. Afterwards, the new screen should get installed before securing the screws once more.
This is quite simple and your iPhone should be functioning normally.