How To Repair Ipad 2 Digitizer
First off repairing your digitizer can be difficult for a newbie if you do not want to mess your ipad up i suggest you visit our ipad repair cleveland facility you will spend a little money but, you will avoid trashing your pad but, if you want to diy follow the instructions below.
The digitizer is the fragile touch screen of the iPad and may easily get spoilt. It is very common to get cracked and broken digitizers. In fact, 10% of the users of the iPads always gets their digitizers before the first year elapses. Most of these times it is the digitizer which will crack while the LCD that is underneath will continue to function. Such cases do no need one to acquire a new iPad. Rather, with proper repair, the iPad will be back to use.
Faced with a broken digitizer, you will have to consider these three options: repairing it on your own, returning the iPad to Apple, or getting it to professional screen technicians. For the DIY die-hards, there are very many stores where they will find OEM digitizers that can be easily installed. The process itself is very simple and needs only a limited number of tools. These are adhesive tapes, screw driver, wedge, a sharp blade and putty knife. Before fixing the digitizer, poer should be switched off and the battery removed. Then the digitizer is removed form the iPad. Use hot air driers to loosen the adhesion used to fix the digitizer.
Insert the blade on the iPad seam. Slice through the adhesion from right to left. The wi-fi antenna should then be disconnected. The volume as well as power controls should not get damaged as you separate the two iPad parts. Thence the digitizer should be swung to the side. Then the LCD screen should be removed. Take care not to sever the flex cable in the process. This transmits the video and should be disconnected by removing the LCD. This will be unscrewed and the flex cable removed. Afterwards, the LCD screen can be lifted.
The video connector should first get disconnected before the old digitizer is removed. The digitizer should be disposed off in a safe way. Next, the brand new digitizer is then installed. Follow the initial procedure in reverse and secure it with the adhesive tapes. All the old adhesion should get out of the iPad before sealing. All the dust particles in the inside of the iPad should be wiped. Thereafter the digitizer is secured with screws. The parts should be properly aligned.
Make sure that the camera as well as the home button is also aligned correctly before you reseal. The adhesive should get enough time to hold. Set it on its screen, putting some weight at the back and wait for a whole day.
With a new digitizer, the iPad is good like new. Should the digitizer fail to function, the selling company must be contacted. Getting your own digitizer is so simple that anyone may try it. One only needs some patience and a few handy tools.